Achieves a processing oil coating that is ideal for punching work on press machines, etc., without overspray, mist, or splashing.
LUBEMATE
The Lubemate System uses a micro-volume, low-pressure spray application method to apply a uniform, dense, thin film of machining oil. As a result, there is no overspray, mist, or splashing, making it an ideal processing oil coating for punching operations on press machines, etc.easily integrated with a PLC.
- โต๊ะพ่นสเปรย์ที่นั่นพิเศษ LM87 สามารถใช้ได้กับเครื่องอัดจำนวนมากที่แพร่หลายทั่วไป
- ส่วนเครื่องอัดความเร็วสูงและระบบควบคุมสูงพร้อมควบคุมปริมาณการเคลือบระดับไมโครละเอียดพิเศษ
- สามารถพ่นฟิล์มบางพิเศษได้ต่ำมาก
- หนึ่งตัวควบคุม สามารถวาล์วได้สูงสุดถึง 8 วาล์ว
- เวลาหนึ่งตัวของวัสดุที่มีขนาดสูงสุด 165 มม. (ครั้งรุ่น LM87-WF)
- ห้องโดยสารลงเพื่อ
Significantly improved controllability of machining oil flow rate compared to conventional products
The Lubemate system uses a micro-pressure method to spray coat processing oil into a dense film. Micro-volume, low-pressure nozzle air provides a uniform, quantitative, and appropriate amount of oil coating without overspray, mist, or splashing. It is easy to set up and takes less time to start up than other methods.
Enables uniform processing oil spray coating
- Enables uniform and uneven coating in a small amount
- Adjustment is possible even during oil coating
- Modular system can be expanded to match material width
- Can also be used for intermittent coating
- Oil supply is pressurized tard frame
·connector
·motor - Compatible with tanks, pumps, and centralized lubrication systems
- Compatible with two types of oil by modularizing the system
- Easy handling, high reliability and low maintenance
- Easy to set up and get started right away
Examples of compatible applications (precision press parts)
- Recore
- Can end pull tab
- battery parts
- Heat exchanger: fin molding
- Auto parts
- watch parts
- mobile device parts
LM87 &LM87-WF Precision dispensing spray valve
| Size | 65.8mm(H)×46.2mm(W) |
|---|---|
| weight | 263g |
| fluid chamber | SUS303 |
| needle, nozzle | SUS303 |
| air cap | SUS303 |
| diaphragm | PTFE, FKM |
| Liquid supply port | 1/8NPT female |
| Mounting holes | M6 tap hole |
LM62 In-mold lubrication valve
| Size | φ26.9mm (liquid chamber part) x 62.8mm length |
|---|---|
| weight | 265g |
| Material | SUS303 *Wetted parts are SUS303, UHMW |
LMC380D Lubemate System Controller
| Size | 183(W)×255(D)×345(H)mm Excluding protrusions *Controller only |
|---|---|
| weight | Approximately 6.5kg Controller only |
| Supply air pressure | 0.4～0.6MPa |
| tank pressure | 0.12～0.5MPa |
| Atomization pressure adjustment range | 0～0.5MPa |