World-class ultra-compact JET valve realizes minute amount dispensing
Ultra-compact electromagnetic control non-contact dispenser JETTY
JETTY is an ultra-high-speed electromagnetically controlled jet dispenser that applies fluids to workpieces without contact. The world’s smallest class electromagnetically driven valve dispenses a wide range of low to high viscosity fluids at high speed and stably.
- Adopts world-class ultra-compact and ultra-light electromagnetic drive system
- Modularization of major jet functions. Maintenance can be done within minutes with a minimum number of parts
- Drive engine with constant cooling structure improves stability during continuous discharge
- Compatible with a variety of liquids thanks to a wide variety of valve shapes
- Can handle a wide viscosity range from low to high viscosity
- Nozzle lineup starts from orifice diameter 60μ
Improved yield with fixed amount coating
The high-speed jet with a minimum ejection time of 0.7 mm/sec enables minute ejection of dots of 200 μm or less.
Simple structure and easy maintenance
Major jet functions are modularized, allowing maintenance within minutes with a minimum number of parts.
Compatible with a variety of liquids with a wide variety of valve shapes
The tip shape of the tappet can be selected from tapered type, conical type, ball type, etc., and supports a variety of viscosity ranges from low to high viscosity.
Application example
| liquid agent | Applications |
| Epoxy/UV adhesive | Electronic components, semiconductors, FPD |
| pitch resin | battery cap sticker |
| flux | Boards, electronic parts |
| イ ン ク | Bad marking of parts |
| Moisture-proof insulation | Boards, electronic parts |
| lubricant | Gears/sliding parts |
| electrolyte | Condensers |
Product Specifications
| dispense valve | dispense controller | |
|---|---|---|
| Dimensions mm (W x D x H) | 31×92.5×92 (excluding nozzle part) | 250×220×107 |
| weight | 364g | 5700g |
| power supply | AC100V to AC240V 3A (50/60Hz) | |
| Current consumption | 3A/AC100V | |
| supply air pressure | Maximum 0.6Mpa | |
| Dispensing cycle | Maximum 100Hz (300Hz for optional engine) | |
| nozzle heater | up to 70℃ | |
| Installation environment | 5°C to 40°C (no condensation) | |
| Discharge nozzle diameter (dedicated) | Minimum 60μ (carbide nozzle) | |
| liquid syringe | 5,10,30,55 cc | |
| I / O | Dsub15-pin connector (Dsub25-pin connector/external time control) | |
