High-speed jet applies fixed amount of grease
Grease high precision non-contact dispenser
G-DOT
G-DOT is a high-speed, non-contact dispenser that dispenses a fixed amount of high-viscosity grease.
It can be applied precisely to grooves and gaps in automotive parts without splashing from the outside. There is no need to adjust the height even if the distance to the workpiece changes.
- JET application design (setting) model for high viscosity grease
- Can be connected to a pail system
- Dramatically reduced takt time
- High-precision dispensing improves quality
- Syringe-filled materials can also be loaded (optional)
Apply a fixed amount of high viscosity grease
This is a dedicated grease jet dispenser that is set up to apply a fixed amount of high viscosity grease without contact.
Stable application is possible even on fine lines with an application volume of 0.3 μL/cm.
Simple structure and easy maintenance
The simple structure with few parts makes it easy to disassemble and clean.
Uses a dedicated external supply structure
Materials can be supplied directly from an external pail or tank using a high-pressure pump, without the need to transfer them into a syringe.
Purpose
Ideal for assembling bearings, joints, sliding parts for instrument panel switches, gear parts, electrical parts, etc.
Product Specifications
| dispense valve | dispense controller | ||
|---|---|---|---|
| Size | Width | 37.0 mm | 250.0 mm |
| 高 さ | 100.0 mm | 107.0 mm | |
| depth | 136.0 mm | 220.0 mm | |
| weight | 630g | 5700g | |
| power supply | 100VAC, 50/60Hz | ||
| Current consumption | 3A/AC100V | ||
| Grease supply pressure | Maximum 1.2MPa | ||
| Dispensing cycle | Maximum 100Hz (300Hz for optional engine) | ||
| nozzle heater | Can be heated up to 100℃ | ||
| Installation environment | 5°C to 40°C (no condensation) | ||
| Discharge nozzle diameter (dedicated) | 0.11mm ~ 0.91mm | ||
| I / O | Dsub15-pin connector (Dsub25-pin connector/external time control) | ||
