Endless piston technology ensures stable dispensing without pulsation
Positive displacement high-precision microdispenser Preeflow®
preeflow® eco-PEN300/450/600/700 3D
The preeflow® eco-PEN 300/450/600/700 3D high-precision positive displacement microdispensers are capable of precisely dispensing a wide range of fluids, from low to high viscosity. The dispenser body features a completely sealed structure consisting of a rotor and stator, and the controlled rotation of the rotor ensures highly accurate volumetric transfer while maintaining a high level of airtightness without affecting the material’s properties. The suck-back function also prevents dripping, maintaining a clean work environment.
- Achieves a discharge accuracy of ±1% with a positive displacement type (at 1° per rotation)
- Stable continuous discharge without pulsation is possible
- Excellent liquid drainage due to suck back function
- Discharge flow rate (ml/min, g/min) can be set
Applications
By using the dedicated controller EC-200K, it is applicable to various coating processes such as spot coating, line coating, and potting.
Optical bonding (SVR, UV materials, etc.), adhesives (silicon materials, etc.), dam/filling (thermosetting materials, silicone materials, etc.), conformal coating, underfill (epoxy materials, etc.), glob tops (thermosetting agents, etc.)・Sealing (silicon material, etc.) ・Minor amount application (UV material, etc.)
UV curing resin
anaerobic adhesive
thermosetting resin
pressure sensitive adhesive
Filler-containing liquid
Epoxy (1-component/2-component)
Resin for LED
conductive paste
gasoline
toluene
sealant
Flavors
solder paste
flux
silver paste
paint, ink
Polyurethane
grease
Epoxy resin
silicone
thermal paste
waxed paste
Primer
electrolyte
RTV rubber
industrial oil
acetone
alcohol
methyl ethyl keltone
Isopropyl alcohol
bio materials
cosmetics and pharmaceuticals
Reagents etc…
| Main features | Applicable industry |
|---|---|
| ・Stable dispensing without pulsation is possible | ・Electronics implementation |
| ・Compatible with liquids with a maximum viscosity of 7,000,000 mPas | ・SMD/SMT |
| ・Quantity application without being affected by environmental temperature | ·semiconductor |
| ・No valve used | ·medical |
| ・Applicable to liquids that are difficult to apply, such as abrasives and materials containing particles with high shearing properties. | ·Research and Development |
| ・Suck back function prevents liquid dripping and stringiness | ・Photovoltaic cell |
| ・Significantly reduces the amount of liquid used | ・Optics, photonics |
System example

The volumetric high-precision microdispenser eco-PEN is used for applications that require a very high degree of accuracy in dispensing low to high viscosity fluids.
【Be applicable】
- Spot application
- Linear dispensing with flow rate settings that match the cycle speed
- Seal

Product Specifications
| eco-PEN300 | eco-PEN450 | eco-PEN600 | eco-PEN700 3D | |
|---|---|---|---|---|
| External dimensions | W206 mm, 29×29 mm, φ33 mm | W210 mm, 29×29 mm, φ33 mm | W274 mm, 34×34 mm, φ40 mm | |
| weight | About XNUM X g | About XNUM X g | About XNUM X g | |
| Liquid supply port | G 1/8 parallel female thread for pipes | G 1/4 parallel female thread for pipes | ||
| Fluid outlet | Luer lock type with O-ring (patented) | |||
| Input fluid pressure *1 | 0~0.6MPa | |||
| Maximum discharge pressure *2 | 2.0MPa | 1.0MPa | ||
| Wetted parts | HD-POM/SUS | |||
| Stator material | High molecular weight polyethylene, VisChem | |||
| fixed seal | O-ring/Viton (for materials)/NBR (for dust) | O-ring/Viton | ||
| Motor | DC18-24V (with encoder) | |||
| Operating Environments | +10℃ to +40℃ (standard pressure 0.1MPa) | |||
| Minimum discharge amount | 0.001ml | 0.004ml | 0.015ml | 0.06ml |
| Discharge flow rate | 0.12 to 1.48ml/min | 0.5 to 6.0ml/min | 1.4 to 16.0ml/min | 5.3~60ml/min |
*1 When using low viscosity fluids, please use the lowest possible fluid pressure.
*2 The maximum discharge pressure will increase or decrease depending on the viscosity of the liquid used.
Ultra-low-volume dispensing with the utmost precision
new product“ecoPEN XS” micro dispenser
The ecoPEN XS is a cutting-edge volumetric micro-dispenser developed based on years of trust. It is capable of dispensing minute amounts of material with high precision, and is compatible with a wide range of materials, from solvents to paste-like, highly viscous materials.
The innovative endless piston technology ensures consistent, clean dispensing regardless of viscosity changes, making it flexible for a wide range of applications, from manual to fully automated processes.
- High-precision dispensing: Dispenses minute amounts of material with the utmost precision
- Supports a wide range of materials: Suitable for a variety of materials, from solvents to high viscosity pastes
- High repeatability: Repeatability of over 99% ensures stable dispensing
- Compact and lightweight: designed for easy integration into manual, semi-automatic and fully automatic systems
- Improved ease of use: easy to clean and easy to adjust flow rate
- 360° Syringe Connection: Offers maximum flexibility and convenience
| Use | |
|---|---|
| Electronic components and SMT (surface mount technology) | High-precision dispensing for small parts possible |
| Medical equipment | Reliable, clean dispensing for sensitive materials |
| Auto parts | Ideal for precise application of adhesives and sealants |
Product Specifications
| eco-PEN XS 180 | |
|---|---|
| Dimensions: L x W x H | 65 22 × × 178mm |
| weight | 175g (excluding cartridge and holder) |
| Operating pressure *1 | 0 – 6 bar |
| Maximum discharge pressure *2 | 2.0MPa |
| Discharge flow rate | 0.0044 – 0.35 ml/min |
| Minimum discharge amount | 0.25μl |
| Discharge accuracy *3 | ± 1% |
| Viscosity range | Supports everything from solvents to paste materials |
| Wetted parts | POM, vidur-C1, stainless steel, HD-PE |
*1 Non-self-leveling material
*2 Maximum discharge pressure and self-sealing may increase or decrease depending on viscosity changes. Please contact the manufacturer.
*3 Volumetric delivery as absolute deviation per dispenser revolution. Varies depending on viscosity of dispensed material.
